Hi there,
I use sasc-ng (and dvbloopback) on my computer. I can watch the scrambled
channels on Kaffeine and unicast/multicast them using MuMuDVB. Yet when I
try to stream the same transponders with Getstream, It seems that the
streaming packets aren't descrambled. Also when I set the full pids (instead
of a specific pnr) only the FTA channels can be received.
The following is my configuration file:
http {
port 8001;
};
adapter 1 {
dvb-s {
lnb {
lof1 9750000;
lof2 10600000;
slof 11700000;
};
transponder {
frequency 10949000;
polarisation v;
symbol-rate 27500000;
};
};
stream {
name "CH";
input {
pnr 7466;
};
output-http {
url "/ch";
};
};
};
nima@nima-pc:~$ ./getstream -dc ch.conf
2011-03-05 16:29:54.733 fe: Adapter 1 Setting up frontend tuner
2011-03-05 16:29:54.749 fe: DVB-S tone = 1
2011-03-05 16:29:54.749 fe: DVB-S voltage = 0
2011-03-05 16:29:54.749 fe: DVB-S diseqc = 0
2011-03-05 16:29:54.749 fe: DVB-S freq = 10949000
2011-03-05 16:29:54.749 fe: DVB-S lof1 = 9750000
2011-03-05 16:29:54.749 fe: DVB-S lof2 = 10600000
2011-03-05 16:29:54.749 fe: DVB-S slof = 11700000
2011-03-05 16:29:54.749 fe: DVB-S feparams.frequency = 1199000
2011-03-05 16:29:54.749 fe: DVB-S feparams.inversion = 2
2011-03-05 16:29:54.749 fe: DVB-S feparams.u.qpsk.symbol_rate = 27500000
2011-03-05 16:29:54.749 dmx: Setting filter for pid 8192 pestype 20
2011-03-05 16:29:54.782 fe: Adapter 1 Status: 0x01 (HAS_SIGNAL)
2011-03-05 16:29:54.883 fe: Adapter 1 Status: 0x1f (HAS_SIGNAL HAS_CARRIER
HAS_VITERBI HAS_SYNC HAS_LOCK)
*-- Nima Mohammadi*
