Getstream

Download

getstream@gt.owl.de

June 2011

1 participants
2 discussions

Re: Getstream strange problem.
by Ali H.M. Hoseini 29 Jun '11

29 Jun '11

Dear Peter, 1: We have Televes 17x17x16 Ref. 7345 multiswitch. (you could find its specifications in http://www0.televes.com/inting/producto/catalogos/Multiswitches_Multimat2.p… 5). 2: I could not find any A/B mode on this switch. It has just 17 input (1 terrestrial, 16 for 4 satellites), 16 outputs for receivers and 17 cascade outputs. 3: The strange thing is that my computer works with some multiswitches, and does not work with some others, and I could not find why. 4: I tested with multiswitches from Hirschmann and Finetronics, but both does not work. But it seems some old multiswitches from Triax works very well. 5: You are right. when I use diseqc 0 the diseqc is disabled, but its fine because hotbird is in my input A (or zero) so when I use this multiswitch give position A by default. 6: I've attached my config file. 7: As I said before, progDVB in windows and satellite receivers both work fine with this multiswitch. Even linux scan commands works well, but getstream does not work correctly. I suspect you are right about multiswitch setting, but I could not find anything to adjust. Any suggestions? Also any suggestion about my config file? Any thing I could add to do diseqc manually works with this multiswitch? Best regards. Ali. On Tue, Jun 28, 2011 at 12:38 AM, Peter Schranz < peter.schranz(a)heeb-schranz.ch> wrote: > Hi, > > what type of multiswitch do you use and what is your config file? How many > Satellites does your antenna receive? Also many multiswitch allow to > configure each individual input to have another satellite as default. When > you say V/Hi and H/Lo is working I suspect that your Multiswitch is set to > A/B mode only (burst). It should be set to real diseqc. I run a multiswitch > as well (Hotbird/Astra) with 8 outputs and have absolutely no problems. > > Note that you have to select diseqc 1 for the first and diseqc 2 for the > second satellite a.s.o. diseqc 0 does not work! (fe.c uses > fe.dvbs.t_diseqc-1) and you still need to specify voltage and polarisation > (reading your mail you did that). > > Regards > Peter Schranz > > Am 22.06.2011 um 06:24 schrieb Ali H.M. Hoseini: > > Hi, > > I used getstream for more than 3 years, and it is a wonderful software, > fast and reliable. > But now I faced a very strange problem. > We moved to a satellite multiswitch for reception. When I scan with option > for diseq, everything is OK. But in getstream I Should reverse diseq > number to work, and : > > 1: Everything in port 0 of multiswitch, when diseqc option of config is 0 > is works perfectly. (when actually multiswitch is bypassed). > 2: Everything in other ports (1-3) works for frequencies in Vertical/High > (over 11.7 Ghz, vertical) and Horizontal/Low (under 11.7 GHz, Horizontal) > works, and others does not work. > 3: When I connect Vertical/Low of LNC to Horizental/High of multiswitch > those frequencies start to work in getstream, but I could not scan them > anymore. > 4: All frequencies work perfectly with satellite receivers and ProgDVB in > windows. > > I concluded that problem is in getstream, but I could not trace its root. > Any suggestion? > > J. Jikman. > _______________________________________________ > Getstream mailing list > Getstream(a)gt.owl.de > http://gt.owl.de/cgi-bin/mailman/listinfo/getstream > > >

1 0

Getstream strange problem.
by Ali H.M. Hoseini 22 Jun '11

22 Jun '11

Hi, I used getstream for more than 3 years, and it is a wonderful software, fast and reliable. But now I faced a very strange problem. We moved to a satellite multiswitch for reception. When I scan with option for diseq, everything is OK. But in getstream I Should reverse diseq number to work, and : 1: Everything in port 0 of multiswitch, when diseqc option of config is 0 is works perfectly. (when actually multiswitch is bypassed). 2: Everything in other ports (1-3) works for frequencies in Vertical/High (over 11.7 Ghz, vertical) and Horizontal/Low (under 11.7 GHz, Horizontal) works, and others does not work. 3: When I connect Vertical/Low of LNC to Horizental/High of multiswitch those frequencies start to work in getstream, but I could not scan them anymore. 4: All frequencies work perfectly with satellite receivers and ProgDVB in windows. I concluded that problem is in getstream, but I could not trace its root. Any suggestion? J. Jikman.

1 0